97
edits
Changes
no edit summary
*Fuel Line size is 5mm or 3/16"
*91 (R+M)/2 Octane Unleaded Ethanol-free Gasoline is recommended (although some users have been successfully running 90 Octane Unleaded Ethanol-free Gasoline)
*The shorter petcock inlet on the top is the Reserve. The longer petcock inlet on the bottom is the Main. The switch depicts a full cup for Main and a partially empty cup for reserve.
[[File:Champion petcock.jpg|1024px]]
=Interface & Starter=
*Odometer is Kilometers
=Nuts & Bolts=
*Top Yoke Nut (Stem Nut) is sized M22x1.00. The inner diameter of the hollow Stem is approximately 15mm.
*The Front Axle is threaded M10x1.25
=Suspension & Brakes=
*Front Suspension Max Compression is approximately 2.66".
**This tested by first measuring the uncompressed distance between the reflector clamp and the top of the rubber boot with calipers (4.02"). Then a video was taken with a rider "jumping" on the front handlebars. One frame was selected prior to compression and a pixel distance of 234px was measured. then one frame was selected showing the most compression a pixel distance of 79px was measured. An equivalent physical distance of 1.36" was calculated and then subtracted from the uncompressed number of 4.02" to get a total approximate max compression of 2.66".
**[[File:Champion_Front_Suspension_Compression.png|1024px]]
*Recommended brake pad wear limit is 1.5mm
*Recommended front brake lever play is 10-20mm (0.39-0.79")
*Recommended rear brake pedal free play is 20-30mm (0.79-1.18")
=Tires & Tubes=
*Factory max tire pressure = 248kPa = 36psi
|EPA approved
|}
[[Category: Icebear Champion PBZ125-2]]
