Difference between revisions of "Icebear Champion PBZ125-2 Stock and Compatible Parts"
(→Nuts & Bolts) |
|||
| Line 49: | Line 49: | ||
**[https://www.amazon.com/gp/product/B005UGHFK2 Sedona TR87 4.00/4.50-10 Inner Tube] - successfully used with 4.00x10 tires |
**[https://www.amazon.com/gp/product/B005UGHFK2 Sedona TR87 4.00/4.50-10 Inner Tube] - successfully used with 4.00x10 tires |
||
**[https://www.denniskirk.com/535574.sku Parts Unlimited JS-244A 3.50/4.00-10 Inner Tube] - only compatible with front tire, not rear! Successfully used with 4.00x10 front tire |
**[https://www.denniskirk.com/535574.sku Parts Unlimited JS-244A 3.50/4.00-10 Inner Tube] - only compatible with front tire, not rear! Successfully used with 4.00x10 front tire |
||
| + | |||
| + | [[Category: Icebear Champion PBZ125-2]] |
||
Revision as of 10:18, 12 July 2021
Contents
Drive Train
Electrical
- Spark plug recommendations from the manufacturer
- NGK CR6HSA <-- this is the spark plug most people recommend
- Thunder 1E6
- Torch T1136
Engine
Carburetors
- Stock Carburetor
- Part Number: PZ19
- Engine Opening O.D.: 19mm
- Bolt Hole Spacing (engine side) : 48mm (on center)
- Air Filter Mount: 35mm
- Style: Round bowl with cable choke
- These can be found on eBay for approx. $15
- Mikuni VM22-133
- The Minuki VM22-133 is generally considered to be the "best" (and most expensive) carburetor for the Icebear Champion PBZ125-2
Fluids
Oil
- A popular (and cheap) oil choice is Shell Rotella 15W40 Diesel Oil.
Fuel Delivery
- Purpose Built Auxiliary Fuel Tank Options
- 1L Champion Auxiliary Fuel Tank that bolts to the frame left of the seat
- G-Craft Sub Fuel Tank (for Left Side mounting) that bolts to the frame left of the seat
- 1Gal Sharkbite's Custom Mini's Auxiliary Fuel Tank that bolts under the luggage rack
- Inline Fuel Filters
- Fuel Line Hose Clamps
Interface & Keys
- Key Blank options (maybe... based on info found on 'the net'. not all tested)
Nuts & Bolts
- The Stem or Yoke tube is threaded M22x1.00 and the ID is 15mm. This Open Stem Nut fits if you want to expose the hollow tube to, perhaps, mount accessories (although it is slightly taller than the exposed threads on the Tube so the nut will extend 2-4mm above the tube depending on whether or not you use the factory washers)
- These M10x1.25 Lock Nuts are compatible with the Front Axle
Tires & Tubes
- Tires
- Tubes
- Sedona TR87 4.00/4.50-10 Inner Tube - successfully used with 4.00x10 tires
- Parts Unlimited JS-244A 3.50/4.00-10 Inner Tube - only compatible with front tire, not rear! Successfully used with 4.00x10 front tire
