Icebear Champion PBZ125-2 Stock and Compatible Parts

Contents

Drive Train

• JT 252 17T Front Sprocket

Electrical

• Spark plug recommendations from the manufacturer
  • NGK CR6HSA <-- this is the spark plug most people recommend
  • Thunder 1E6
  • Torch T1136

Engine

Carburetors

• Stock Carburetor
  • Part Number: PZ19
  • Engine Opening O.D.: 19mm
  • Bolt Hole Spacing (engine side) : 48mm (on center)
  • Air Filter Mount: 35mm
  • Style: Round bowl with cable choke
  • These can be found on eBay for approx. $15
• Mikuni VM22-133
  • The Minuki VM22-133 is generally considered to be the "best" (and most expensive) carburetor for the Icebear Champion PBZ125-2

Fluids

Oil

• A popular (and cheap) oil choice is Shell Rotella 15W40 Diesel Oil.

Fuel Delivery

• Purpose Built Auxiliary Fuel Tank Options
  • 1L Champion Auxiliary Fuel Tank that bolts to the frame left of the seat
  • G-Craft Sub Fuel Tank (for Left Side mounting) that bolts to the frame left of the seat
  • 1Gal Sharkbite's Custom Mini's Auxiliary Fuel Tank that bolts under the luggage rack
• Inline Fuel Filters
  • 3/16" 5mm 6mm Barbed Clear Inline Fuel Filters with Magnets
• Fuel Line Hose Clamps
  • 9.8' (3m) 3/16" (5mm) ID 1/3" (8mm) OD Fuel Line with 20x 1/3" (8mm) hose clamps
• Plastic Fuel Tank
  • Plastic Tank
  • Plastic Tank Cap
  • Front Tank Mounting Cushion
  • Plastic Tank Spacer

Frame

Rear Swingarm

• Alternate Swingarms
  • Stock Honda CT70 Box Aluminum Swingarm
    • Requires single additional 1/16" (or two additional 1/32") Washer(s) as spacers
    • Purchase Sources
      • Trail Buddy
      • CHP Motorsports
      • eBay
  • Info sourced from here
• Upgraded Delrin Rear Swingarm Bushings to reduce rear wheel side-to-side plan
  • Specs
    • OD: 0.905"
    • ID: 0.391"
    • L: 1.25"
  • Purchases Sources
    • Contact delrindepot-4 on eBay
  • Images
    • Bushings
    • Bushings on Bolt
    • Bushing installed in Swingarm
  • Info sourced from here

Interface & Keys

• Key Blank options (maybe... based on info found on 'the net'. not all tested)
  • Honda 35121-KW3-771
  • JMA YAMA-22DP
  • JMA YAMA-18D
  • Ilco KA16 (X266)
  • Ilco X91
  • Taylor X91

Nuts & Bolts

• The Stem or Yoke tube is threaded M22x1.00 and the ID is 15mm. This Open Stem Nut fits if you want to expose the hollow tube to, perhaps, mount accessories (although it is slightly taller than the exposed threads on the Tube so the nut will extend 2-4mm above the tube depending on whether or not you use the factory washers)
  • Zeta ZE58-2022 (blue)
  • Zeta ZE58-2023 (red)
• These M10x1.25 Lock Nuts are compatible with the Front Axle

Wheels, Tires & Tubes

• Wheels
  • CT70 rear hub ball bearings fit the Icebear Champion rear hub (front are not compatible)
    • All ball rear wheel bearings
• Tires
  • IRC Trial 4.00x10 Tire
• Tubes
  • Sedona TR87 4.00/4.50-10 Inner Tube - successfully used with 4.00x10 tires
  • Parts Unlimited JS-244A 3.50/4.00-10 Inner Tube - only compatible with front tire, not rear! Successfully used with 4.00x10 front tire