Revision as of 16:47, 11 July 2019

Universal Media Server (or UMS for short) is a pretty cool program that will both create a browsable website of your media as well as stream it to compliant devices that support UPnP or DLNA.

This howto is adapted from this article describing how to install an older version of UMS on an older version of Ubuntu.

*This article assumes the hostname of your server is MyMediaServer

Install UMS

1. Install the necessary packages by running the following commands

   sudo apt-get install software-properties-common
   sudo apt-get update
   sudo apt-get install openjdk-8-jre openjdk-8-jre-headless
   apt-get install mediainfo dcraw vlc-bin mplayer mencoder

2. Install UMS 8.0.1 by running the following commands

   cd /opt
   sudo wget https://downloads.sourceforge.net/project/unimediaserver/Official%20Releases/Linux/UMS-8.0.1.tgz
   sudo tar -xvzf UMS-8.0.1.tgz
   sudo ln -s /opt/ums-8.0.1 ums
   sudo rm UMS-8.0.1.tgz

Make UMS Start on Boot

1. Create an init.d script by running

   sudo nano /etc/init.d/ums

   and copying the following into that file

   #!/bin/bash
   #
   ### BEGIN INIT INFO
   # Provides:          ums
   # Required-Start:    $local_fs $remote_fs $network
   # Required-Stop:     $local_fs $remote_fs $network
   # Default-Start:     2 3 4 5
   # Default-Stop:      0 1 6
   # Short-Description: Starts UMS program.
   # Description:       Java Upnp Media Server dedicated to PS3
   ### END INIT INFO
   
   #set -x
   
   # Author: Papa Issa DIAKHATE <paissad@gmail.com>
   #
   PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
   DESC="Universal Media Server"
   NAME=ums
   UMS_PROFILE=/etc/UMS.conf
   DAEMON=/opt/ums/UMS.sh
   DAEMON_OPTS="console"
   SCRIPTNAME=/etc/init.d/ums
   UMS_START=1 # Wether to start or not UMS ver at boot time.
   DODTIME=30  # Time to wait for the server to die, in seconds.
               # If this value is set too low you might not
               # let the program to die gracefully and 'restart' will not work
   
   test -x $DAEMON || exit 1
   
   # Load the VERBOSE setting and other rcS variables
   . /lib/init/vars.sh
   
   # Define LSB log_* functions.
   # Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
   . /lib/lsb/init-functions
   
   # Include ums defaults if available
   if [ -f "/etc/default/$NAME" ] ; then
           . /etc/default/$NAME
   fi
   
   # May we run the init.d script ?
   [ $UMS_START = 1 ] || exit 1
   
   #--------------------------------------------------------------------------
   # Some color codes
   txtred=$'\e[0;31m' # Red
   txtylw=$'\e[0;33m' # Yellow
   txtrst=$'\e[0m'    # Text Reset
   #--------------------------------------------------------------------------
   warnout(){
       echo >&2 -e ""$txtylw"Warning:$txtrst $1"
   }
   #--------------------------------------------------------------------------
   running(){
       pid=`pgrep -f 'java .*ums.jar.*'`
   }
   #--------------------------------------------------------------------------
   do_start(){
       running && { warnout "$NAME is already running !"; exit 0; }
       echo "Starting $DESC : $NAME"
       UMS_PROFILE="$UMS_PROFILE" start-stop-daemon --start --quiet --background --oknodo \
           --exec $DAEMON -- $DAEMON_OPTS
   
   }
   #--------------------------------------------------------------------------
   do_stop(){
       running || { warnout "$NAME is NOT running !"; exit 0; }   
       local countdown="$DODTIME"
       echo -e "Stopping $DESC : $NAME \c "
       kill -9 $pid
       while running; do
           if (($countdown >= 0)); then
               sleep 1; echo -n .;
               ((--countdown))
           else
               break;
           fi
       done
       echo
       # If still running, then try to send SIGINT signal
       running && { \
           echo >&2 "Using kill -s SIGINT instead"; \
           echo >&2 "If you see this message again, then you should increase the value of DODTIME in '$0'."; \
           kill -2 $pid; \
       }
   
       if [ -e "/usr/share/ums/debug.log" ]; then
       count=9
       while [ $count -ge 1 ]
       do
       if [ -e "/usr/share/ums/debug.log.$count" ]; then
           plus=$((count+1))
           mv "/usr/share/ums/debug.log.$count" "/usr/share/ums/debug.log.$plus"
       fi
           count=$((count-1))
       done
       if [ -e "/usr/share/ums/debug.log" ]; then
           mv "/usr/share/ums/debug.log" "/usr/share/ums/debug.log.1"
       fi
       fi
   
       return 0
   }
   #--------------------------------------------------------------------------
   do_force-stop(){
       running || { warnout "$NAME is NOT running !"; exit 0; }   
       echo "Stopping $DESC : $NAME"
       kill -9 $pid
       if [ -e "/usr/share/ums/debug.log" ]; then
       count=9
       while [ $count -ge 1 ]
       do
       if [ -e "/usr/share/ums/debug.log.$count" ]; then
           plus=$((count+1))
      mv "/usr/share/ums/debug.log.$count" "/usr/share/ums/debug.log.$plus"
       fi
          count=$((count-1))
       done
       if [ -e "/usr/share/ums/debug.log" ]; then
      mv "/usr/share/ums/debug.log" "/usr/share/ums/debug.log.1"
       fi
       fi
   }
   #--------------------------------------------------------------------------
   do_status(){
       echo -n " * $NAME is "
       ( running || { echo "NOT running "; exit 0; } )
       ( running && { echo "running (PID -> $(echo $pid))"; exit 0; } )
   }
   #--------------------------------------------------------------------------
   case "$1" in
   
       start|stop|force-stop|status)
           do_${1}
           ;;
       restart|reload)
           do_stop
           do_start
           ;;
       force-restart|force-reload)
           do_force-stop
           do_start
           ;;
       *)
           echo "Usage: $SCRIPTNAME {start|stop|force-stop|restart|force-restart|reload|force-reload|status}"
           exit 1
           ;;
   esac

2. Make that script executable by running

   chmod +x /etc/init.d/ums

3. Make the system aware of your new script by running

   update-rc.d ums defaults

Configure UMS

1. 1. Copy the default configuration files to /etc/ by running the following commands

      sudo cp /opt/ums/UMS.conf /etc/
      sudo cp /opt/ums/WEB.conf /etc/ums/

   2. Edit UMS.conf by running

      sudo nano /etc/UMS.conf

      and setting the following variables (you'll have to setup folders and folders_monitored to something specific for your environment)

      server_name = MyMediaServer
      language = en-US
      minimized = true
      auto_update = true
      hide_advanced_options = false
      single_instance = true
      chromecast_extension = true
      prettify_filenames = true
      show_server_settings_folder = true
      atz_limit = 3000
      show_recently_played_folder = true
      folders = /mnt/media/Video/Movies, /mnt/media/Video/TV_Shows, /mnt/media/Video/Web_Shows, /mnt/media/Music, /mnt/media/Comedy
      folders_monitored =  /mnt/media/Video/Movies, /mnt/media/Video/TV_Shows, /mnt/media/Video/Web_Shows, /mnt/media/Music, /mnt/media/Comedy
      web_port = 80
      web_conf = /etc/ums/WEB.conf
      name = main

Start UMS

1. 1. start UMS by running

      sudo service ums start

   2. visit the UMS webpage by going to http://MyMediaServer in a web browser

References

• https://www.slsmk.com/how-to-install-universal-media-server-ums-on-ubuntu-in-headless-mode/