Difference between revisions of "How to put a Logo on a PCB in Altium"
From steamWiki
(→References) |
(→Importing the Image into Altium) |
||
| Line 22: | Line 22: | ||
##Click "Browse" in the lower right and navigate to the PCBLogoCreator.PRJSCR file. Select it and click "Open". | ##Click "Browse" in the lower right and navigate to the PCBLogoCreator.PRJSCR file. Select it and click "Open". | ||
#Now, regardless of which method you just chose to use do the following | #Now, regardless of which method you just chose to use do the following | ||
| − | ##Click the "DXP" button in the upper left corner & select "Run | + | ##Click the "DXP" button in the upper left corner & select "Run Script..." |
##Click "RunConverterScript" and hit "OK" | ##Click "RunConverterScript" and hit "OK" | ||
#Now a new PcbDoc should have opened and a "PCB Logo Creator" dialog box appeared. | #Now a new PcbDoc should have opened and a "PCB Logo Creator" dialog box appeared. | ||
Revision as of 14:17, 4 September 2013
This guide will explain how to take a Logo (or other simple image), that is in a digital format (BMP, JPG, PNG, etc), and turn it into a 2-tone Silk Screen Overlay in Altium Designer. The guide was created with AD10 but the process should be similar for other versions of Altium.
Contents
Assumptions
- You've got Altium Designer 10 installed
- You've got a graphics editing program available such as MS Paint, Adobe Photoshop, or GIMP
The Guide
Preparing Your Image
Coming Soon!
Importing the Image into Altium
- Download the Altium Example Scripts from here.
- Extract the Scripts folder to "C:\Program Files (x86)\Altium\AD 10\Examples\" (or whever your Altium Examples folder is located)
- If you're going to be using this script a lot, load the PCBLogoCreator.PRJSCR Script Project into your Altium Workspace. This can be done in 1 of 2 ways:
- Navigate to "C:\Program Files (x86)\Altium\AD 10\Examples\Scripts\Delphiscript Scripts\PCB\PCB Logo Creator" and double click "PCBLogoCreator.PRJSCR".
- Start Altium, select File->Open... and navigate to PCBLogoCreator.PRJSCR and click "Open".
- If you only want to use it sparingly you can do the following:
- Start Altium
- Click the "DXP" button in the upper left corner & select "Run Script..."
- Click "Browse" in the lower right and navigate to the PCBLogoCreator.PRJSCR file. Select it and click "Open".
- Now, regardless of which method you just chose to use do the following
- Click the "DXP" button in the upper left corner & select "Run Script..."
- Click "RunConverterScript" and hit "OK"
- Now a new PcbDoc should have opened and a "PCB Logo Creator" dialog box appeared.
- Click "Load" and select the .BMP file you prepared above.
- Select the "Board Layer" (I recommend Top Overlay for most purposes).
- Select the "Scaling Factor" (you're going to have to experiment with this but 1000 mils = 1 inch).
- Choose any check box options you want (typically you won't need any).
- Hit "Convert" & wait a bit.
- Once the conversion has completed click the "Exit" button
- Now you have a Logo built out of Top Overlay lines! You can get it onto your chosen PCB via Copy/Paste or make it reusable by reading the next section.
Making your Imported Image reusable
Coming Soon!
