Open main menu

How to interface with two 16-bit Flash parts working as a single 32-bit Flash in EDK 12.1 using XPS MCH EMC

Revision as of 09:13, 18 June 2010 by Sean (talk | contribs)

Revision as of 09:13, 18 June 2010 by Sean (talk | contribs)

This guide will explain how to setup an EDK 12.1 project to interface with two 16-bit Atmel (AT49BV322D, AT49BV322DT, AT49BV322A, AT49BV322AT) Flash Memory parts organized in parallel acting as a single 32-bit Flash Memory using the Xilinx XPS_MCH_EMC IP Core.

Tweaking of the XPS_MCH_EMC Properties is necessary because this Flash Configuration is addressed like a 16-bit Flash but data is read & written like a 32-bit Flash. By default, the XPS_MCH_EMC is not setup to handle this situation.


Retrieved from "https://steamforge.net/wiki/index.php?title=How_to_interface_with_two_16-bit_Flash_parts_working_as_a_single_32-bit_Flash_in_EDK_12.1_using_XPS_MCH_EMC&oldid=131"
Last edited on 18 June 2010, at 13:57