1,575
edits
Changes
no edit summary
#First remove the kickplate beside the front Passenger Seat.<br />[[File:Yaesu_Install_Cabling_1.jpg|400px]]
#Then thread the power & Interface cables from underneath the Passenger Seat to under the Kickplate. The Interface cable is the same on both sides but make sure you leave the white plug underneath the Passenger seat as this is what plugs into your Radio. Pull the excess through and make sure you have enough slack underneath the seat to allow you to plug into the Raido.<br />[[File:Yaesu_Install_Cabling_2.jpg|400px]][[File:Yaesu_Install_Cabling_3.jpg|400px]][[File:Yaesu_Install_Cabling_9.jpg|400px]]
#Now run both cables toward the front of the car and through the white plastic structure.<br />[[File:Yaesu_Install_Cabling_4.jpg|266x400px]][[File:Yaesu_Install_Cabling_5.jpg|266px400px]]#Now run both cables up under the vertical grey plastic so that it comes out under the glove box.<br />[[File:Yaesu_Install_Cabling_6.jpg|400px266px]][[File:Yaesu_Install_Cabling_7.jpg|400px266px]]
#Send the cables out the back so they are hidden and put the kickplate back on.<br />[[File:Yaesu_Install_Cabling_8.jpg|266px]]