1,575
edits
Changes
→DD-WRT Setup
=DD-WRT Setup=
#Using a wired connection, log into your DD-WRT router
#Navigate to '''Setup -> Basic Setup -> WAN Setup -> WAN Connection Type -> Connection Type ''' & select "'''Automatic Configuration - DHCP"'''#Navigate to '''Setup -> Basic Setup -> Router IP ''' and enter in the values below##'''Local IP Address: ''' "192.168.1.1"##'''Subnet Mask: ''' "255.255.255.0"##'''Gateway: ''' "0.0.0.0"##'''Local DNS: ''' "0.0.0.0"#Navigate to '''Setup -> Basic Setup -> Network Address Server Settings (DHCP) ''' and enter in the values below##'''DHCP Type: ''' "DHCP Server"##'''DHCP Server: ''' "Enable"##'''Start IP Address 192.168.1.: ''' "100"#Hit '''Apply Settings'''#Hit '''Save'''<br />[[File:DDWRT-Setup-Basic_Setup.png]]
<br />
<br />
=i38HG / 5268AC Setup=
#Using a wired connection, log into your AT&T Router (the IP address is printed on the side, or bottom, of the unit. The i38hG password is printed on the side of the DC Power Supply / Battery Backup. The Device Access code for the 5268AC is printed on the bottom of the unit)
