1,575
edits
Changes
no edit summary
#Download and install [https://secure.xilinx.com/webreg/register.do?group=dlc&htmlfile=&emailFile=&cancellink=&eFrom=&eSubject=&version=10.1&akdm=1&filename=pgmtools_sfd.tar Xilinx iMPACT 10.1] if you don't already have it.
#Download and unzip the [http://steamforge.net/files/Xil3S1800ADSP_Rev1_serial_flash_config_v10.1.zip Xilinx XIP Tool].
# Copy your .bit file into the folder with the XIP tools. This guide will assume your .bit file is called <span style="color:#55E439">awesome.bit"</span>.# Edit <span style="color:#55E439">burn_intel_s33.bat </span> by modifying line 30 to point to your .bit file's name. (ie: change to "set bitstream=awesome").# Ensure that the path to impact.exe is in your <span style="color:#55E439">PATH </span> (typically <span style="color:#55E439">impact.exe </span> is located at something like <span style="color:#55E439">C:\Xilinx\10.1\ISE\bin\nt64\</span>)# With the board power Off, place a jumper on <span style="color:#55E439">JP7 </span> & ensure that there is no jumper on <span style="color:#55E439">JP8</span>.# Attach a Xilinx Programming Cable (with flying leads) to <span style="color:#55E439">J10</span>. The silkscreen on the board will explain which lead goes where.
# Power on the board.
# Double click on <span style="color:#55E439">burn_intel_s33.bat</span>.
=== iMPACT ===
