1,575
edits
Changes
no edit summary
#*Note that the .bit extension is not used
#Ensure that the path to impact.exe is in your <span style="color:#55E439">PATH</span> (typically <span style="color:#55E439">impact.exe</span> is located at something like <span style="color:#55E439">C:\Xilinx\10.1\ISE\bin\nt64\</span>)
#With Ensure the board power Off, place a jumper Board is Powered <span style="color:#55E439">OFF</span>#Jumper pins <span style="color:#55E439">1</span> & <span style="color:#55E439">2</span> (both pins) on <span style="color:#55E439">JP7</span>#Jumper pins <span style="color:#55E439">3</span> to <span style="color:#55E439">4</span> and <span style="color:#55E439">5</span> to <span style="color:#55E439">6</span> (<span style="color:#55E439">M1</span> & ensure that there is no jumper on <span style="color:#55E439">JP8M2</span>. Ensure that , both center columns of ) on <span style="color:#55E439">JP9</span> (#Ensure there is <span style="color:#55E439">M1NO</span> & Jumper on <span style="color:#55E439">M2JP8</span>) are jumpered.
#Attach a Xilinx Programming Cable (with flying leads) to <span style="color:#55E439">J10</span>. The silkscreen on the board will explain which lead goes where.
##VCC Red