1,575
edits
Changes
→Prepping The Truck
===Prepping The Truck===
#Pull up the front lip of the bed liner. I simply had to pull up & out on the middle of the top lip to get it to come free. I probably pulled it off and put it back on 20 times during the install to check fit.<br />[[File:Strut_Channel_Liner_Lip.jpg|400px]]
#<span style="color:#55E439">'''This is probably the trickest part of the whole install'''</span>: You need to drill pilot holes in your bed-liner that line up with the factory bolts on the Frontier. I basically had to eyeball my first hole. From there I measured as best I could (although this was made difficult but the uneven surface of the bed-liner) I haven't come up with a better solution but this worked for me.
##With the bed-liner pulled off (and the factory bolts in place) I eyeballed the first hole and used the smallest drill bit I had to drill a hole through the bed-liner.
