97
edits
Changes
→Wiring
#Reinstall the grommet
#Route the wire around the gas tank and battery to the negative terminal on the battery.
#Crimp/solder a battery terminal lug to the wire and attach it to the battery (I put this in the same lug as I used for my [https://steamforge.net/icebear/index.php/Howto_Add_an_SAE_Battery_Charger_Connector SAE Battery Tender Connector])
#Go back to the front (near the grommet) and route the black wire to the black input on the Converter.
#Cut your black wire to length, install a 1/4" female quick disconnect.
#Route the USB output of the Converter up to where your phone mount is and zip tie it in place.
#Clean up the rest of the wiring wiring and zip-tie it out of the way
=Shopping List=
#[https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=12V+to+5V+DC+USB+Type-C+Right+Angle+Power+Converter+15W&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=12V+to+5V+DC+USB+Type-C+Right+Angle+Step-Down+Power+Converter+Buck+Converter+15W 12V to 5V DC USB Type-C Right Angle Power Converter 15W]
