1,575
edits
Changes
no edit summary
#Edit <span style="color:#55E439">burn_intel_s33.bat</span> by modifying line 30 to point to your .bit file's name. (ie: change to "set bitstream=awesome").
#Ensure that the path to impact.exe is in your <span style="color:#55E439">PATH</span> (typically <span style="color:#55E439">impact.exe</span> is located at something like <span style="color:#55E439">C:\Xilinx\10.1\ISE\bin\nt64\</span>)
#With the board power Off, place a jumper on <span style="color:#55E439">JP7</span> & ensure that there is no jumper on <span style="color:#55E439">JP8</span>. Ensure that both center columns of <span style="color:#55E439">JP9</span> (<span style="color:#55E439">M1 </span> & <span style="color:#55E439">M2</span>) are jumpered.
#Attach a Xilinx Programming Cable (with flying leads) to <span style="color:#55E439">J10</span>. The silkscreen on the board will explain which lead goes where.
#Power on the board.
##Create new project
##Prepare a PROM file
##Target a <span style="color:#55E439">3rd party SPI PROM</span>, PROM format <span style="color:#55E439">MCS</span>, name file and set destination as desired##Select SPI PROM density as <span style="color:#55E439">64M</span>. Leave Add Data Files unchecked.
##Finish.
##Click OK and navigate to desired .bit file. Click Open, and double-click <span style="color:#55E439">Generate File</span>
#Turn off board power
#Connect JTAG to <span style="color:#55E439">J10</span>#Connect jumper to both pins of <span style="color:#55E439">JP7</span>. Center columns of <span style="color:#55E439">JP9 </span> should be jumpered (<span style="color:#55E439">M1 </span> & <span style="color:#55E439">M2</span>).
#Turn on board Power
#Program with iMPACT
##Open iMPACT
##Create New Project
##Choose <span style="color:#55E439">Configure Devices </span> --> <span style="color:#55E439"> Using Direct SPI Configuration mode."</span>
##Finish
##Navigate to desired .mcs file (the one generated in step 2)
##Choose Part Name <span style="color:#55E439">M25P64</span>##Check <span style="color:#55E439">Verify</span> and <span style=" and color:#55E439">Erase" </span> options as desired, then OK.
##Double-click Program. It takes a minute or two before the progress bar moves.
#Turn off board power, disconnect the jumper from <span style="color:#55E439">JP7</span>.
#Turn on board power